DFA - Duraflex Metal Profile with EPDM
Series SB and DFA Dilation Test Report PDF
Duraflex Range Test Certificate PDF
Duraflex Expansion Profile Range PDF
EPDM Expansion joint profiles using Durosol metal profiles
Durosol Aluminium
Durosol Brass
Durosol Stainless Steel
Application:
DURAFLEX metal profiles by Dural are made for particularly highly stressed floors. For example, the expansion joint profiles are suited for warehouses and production floors, underground garages and shopping centres as well as any floors that are to be cleaned using machines. The visible surface of the profile is 10 mm. Both legs are equipped with an EPDM expansion zone. The specially developed expansion joint profile absorbs heavy stresses and spreads them evenly throughout the flooring and the foundations. It also prevents transmission of footfall and sounds from other objects. Important: any expansion joints in the foundations
need to be followed precisely.
Material:
DURAFLEX expansion joint profiles using DUROSOL metal profiles are available in three versions: aluminium, brass and stainless steel. Other materials are available on request.
Properties:
DURAFLEX aluminium profiles may be used wherever unusual chemical reactions are not to be expected. To avoid corrosion, it is necessary to take care with cement materials. Since aluminium is susceptible to alkalis, any mortar, tile adhesive or grout residues must be removed immediately from all visible surfaces. The profile must be completely embedded in the contact layer. This avoids the formation of pockets where
alkaline solutions of water can collect.
Dimensions:
Aluminium / Brass / Stainless steel Inserts / Colour: EPDM / grey
Heights: Aluminium = 2 / 3 / 4,5 / 6 / 8 / 10 / 12,5 / 15 / 16,5 / 18 / 20 / 22 / 25 / 30 mm
Brass = 3 / 4,5 / 6 / 8 / 10 / 12,5 / 15 / 18 / 20 / 25 / 30 mm
Stainless steel = 2 / 3 / 4 / 6 / 8 / 10 / 12,5 / 15 / 16,5 / 17,5 / 20 mm
